Thread Cut License / License

Thread Cut for Rhino 8 and Rhino 9: License Terms
Version 2.2, as of November 2026. English version below.

German

Licensor: Greim & Brugger GmbH (line-up.de)
Werderstr. 30, 79713 Bad Säckingen, Germany
Contact: info@line-up.store

By installing or using Thread Cut ("Software"), you agree to these license terms.

1. Free and Pro

Thread Cut is available as a free Free version and as a Pro version. Both are the same Software. The Pro features are unlocked with a license key that you receive when you buy Pro at line-up.store.

2. License

You receive a perpetual, non-transferable and non-exclusive right to use the Software under these terms. The Software is licensed, not sold. All rights to the Software remain with Greim & Brugger GmbH.

3. Free version

You may use the Free version free of charge for private and commercial purposes on any number of computers.

4. Pro version

One Pro license allows one person to use the Pro features on up to 2 of their own computers. Several people need one license each. The license key belongs to your license and is confidential.

5. What you may do

  • Install and use the Software within your license.
  • Use the Software for private and commercial purposes.
  • Use, sell and hand over to clients, without restriction, any renderings, animations, images and videos you create with the Software.
  • Share Rhino files and exported models containing the generated threads, screws and nuts with clients and partners. Recipients do not need their own license.
  • Manufacture or 3D print models created with the Software.
  • Recommend the Free version and link to the official sources (Rhino Package Manager, food4Rhino, line-up.store).
  • Install updates within major version 2.x free of charge.

6. What you may not do

  • Pass on, publish or sell the license key, or make it available to more people or computers than your license allows.
  • Offer the Software or its installation files for download, sale or rent outside the official sources.
  • Circumvent the license key check or unlock Pro features without a valid key.
  • Modify or reverse engineer the Software, extract its source code, or build your own products on it, except where expressly permitted by law.
  • Include the Software in whole or in part in other plugins, programs or products.
  • Remove copyright or origin notices.

7. Intended use and fits

The generated threads, screws, nuts and washers follow the stated standards. Fits are guide values. Whether a machined or printed part fits depends on the process, machine and material. Check dimensions and fit yourself before manufacturing. For gauges and technical drawings the standards apply.

8. Updates and support

Updates within major version 2.x are free. There is no entitlement to specific updates or new features. Support is available by e-mail at info@line-up.store.

9. Warranty and liability

Statutory warranty rights apply. We are liable without limitation for intent and gross negligence and for injury to life, body or health. In cases of simple negligence we are only liable for breach of essential contractual obligations, limited to the foreseeable, typical damage. For loss of data we are only liable to the extent that would have occurred with regular data backups. Liability under the German Product Liability Act remains unaffected. For the free Free version we are only liable for intent, gross negligence and fraudulently concealed defects.

10. Termination

Any breach of these terms ends the right of use. The Software must then be uninstalled and all copies deleted.

11. Final provisions

German law applies, excluding the UN Convention on Contracts for the International Sale of Goods. For consumers, this choice of law applies only insofar as it does not deprive them of mandatory protection under the law of their country of habitual residence. The place of jurisdiction for merchants is the registered office of Greim & Brugger GmbH. Should any provision be invalid, the remaining provisions remain in effect.

© 2026 Greim & Brugger GmbH. All rights reserved.

English

Licensor: Greim & Brugger GmbH (line-up.de)
Werderstr. 30, 79713 Bad Säckingen, Germany
Contact: info@line-up.store

By installing or using Thread Cut ("Software") you agree to these license terms. In case of doubt, the German version prevails.

1. Free and Pro

Thread Cut is available as a free Free version and as a Pro version. Both are the same Software. The Pro features are unlocked with a license key that you receive when you buy Pro at line-up.store.

2. License

You receive a perpetual, non-transferable and non-exclusive right to use the Software under these terms. The Software is licensed, not sold. All rights to the Software remain with Greim & Brugger GmbH.

3. Free version

You may use the Free version free of charge for private and commercial purposes on any number of computers.

4. Pro version

One Pro license allows one person to use the Pro features on up to 2 of their own computers. Several people need one license each. The license key belongs to your license and is confidential.

5. What you may do

  • Install and use the Software within your license.
  • Use the Software for private and commercial purposes.
  • Use, sell and hand over to clients, without restriction, any renderings, animations, images and videos you create with the Software.
  • Share Rhino files and exported models containing the generated threads, screws and nuts with clients and partners. Recipients do not need their own license.
  • Manufacture or 3D print models created with the Software.
  • Recommend the Free version and link to the official sources (Rhino Package Manager, food4Rhino, line-up.store).
  • Install updates within major version 2.x free of charge.

6. What you may not do

  • Pass on, publish or sell the license key, or make it available to more people or computers than your license allows.
  • Offer the Software or its installation files for download, sale or rent outside the official sources.
  • Circumvent the license key check or unlock Pro features without a valid key.
  • Modify or reverse engineer the Software, extract its source code, or build your own products on it, except where expressly permitted by law.
  • Include the Software in whole or in part in other plugins, programs or products.
  • Remove copyright or origin notices.

7. Intended use and fits

The generated threads, screws, nuts and washers follow the stated standards. Fits are guide values. Whether a machined or printed part fits depends on the process, machine and material. Check dimensions and fit yourself before manufacturing. For gauges and technical drawings the standards apply.

8. Updates and support

Updates within major version 2.x are free. There is no entitlement to specific updates or new features. Support is available by e-mail at info@line-up.store.

9. Warranty and liability

Statutory warranty rights apply. We are liable without limitation for intent and gross negligence and for injury to life, body or health. In cases of simple negligence we are only liable for breach of essential contractual obligations, limited to the foreseeable, typical damage. For loss of data we are only liable to the extent that would have occurred with regular data backups. Liability under the German Product Liability Act remains unaffected. For the free Free version we are only liable for intent, gross negligence and fraudulently concealed defects.

10. Termination

Any breach of these terms ends the right of use. The Software must then be uninstalled and all copies deleted.

11. Final provisions

German law applies, excluding the UN Convention on Contracts for the International Sale of Goods. For consumers, this choice of law applies only insofar as it does not deprive them of mandatory protection under the law of their country of habitual residence. The place of jurisdiction for merchants is the registered office of Greim & Brugger GmbH. Should any provision be invalid, the remaining provisions remain in effect.

© 2026 Greim & Brugger GmbH. All rights reserved.