ThreadCut Lizenz / License
ThreadCut für Rhino 8 und Rhino 9: Lizenzbedingungen / License Terms
Version 2.2, Stand November 2026. English version below.
Deutsch
Lizenzgeber: Greim & Brugger GmbH (line-up.de)
Werderstr. 30, 79713 Bad Säckingen, Deutschland
Kontakt: info@line-up.store
Mit der Installation oder Nutzung von ThreadCut ("Software") stimmst du diesen Lizenzbedingungen zu.
1. Free und Pro
ThreadCut gibt es als kostenlose Free-Version und als Pro-Version. Beide sind dieselbe Software. Die Pro-Funktionen werden mit einem Lizenzschlüssel freigeschaltet, den du beim Kauf im line-up.store erhältst.
2. Lizenz
Du erhältst ein zeitlich unbegrenztes, nicht übertragbares und nicht ausschließliches Recht, die Software nach diesen Bedingungen zu nutzen. Die Software wird lizenziert, nicht verkauft. Alle Rechte an der Software bleiben bei der Greim & Brugger GmbH.
3. Free-Version
Die Free-Version darfst du kostenlos privat und kommerziell nutzen, auf beliebig vielen Rechnern.
4. Pro-Version
Eine Pro-Lizenz erlaubt die Nutzung der Pro-Funktionen durch eine Person auf bis zu 2 eigenen Rechnern. Für mehrere Personen ist je Person eine Lizenz nötig. Der Lizenzschlüssel gehört zu deiner Lizenz und ist vertraulich.
5. Das ist erlaubt
- Die Software installieren und im Rahmen deiner Lizenz nutzen.
- Die Software privat und kommerziell nutzen.
- Renderings, Animationen, Bilder und Videos, die du mit der Software erstellst, ohne Einschränkung nutzen, verkaufen und an Kunden weitergeben.
- Rhino-Dateien und exportierte Modelle mit den erzeugten Gewinden, Schrauben und Muttern an Kunden und Partner weitergeben. Die Empfänger brauchen dafür keine eigene Lizenz.
- Mit der Software erzeugte Modelle fertigen oder im 3D-Druck drucken.
- Auf die Free-Version hinweisen und auf die offiziellen Bezugsquellen verlinken (Rhino Package Manager, food4Rhino, line-up.store).
- Updates innerhalb der Hauptversion 2.x kostenlos installieren.
6. Das ist nicht erlaubt
- Den Lizenzschlüssel an andere weitergeben, veröffentlichen, verkaufen oder mehr Personen bzw. Rechnern zugänglich machen, als deine Lizenz erlaubt.
- Die Software oder ihre Installationsdateien außerhalb der offiziellen Bezugsquellen zum Download anbieten, verkaufen oder vermieten.
- Die Prüfung des Lizenzschlüssels umgehen oder Pro-Funktionen ohne gültigen Schlüssel freischalten.
- Die Software verändern, zurückentwickeln, den enthaltenen Quellcode extrahieren oder darauf aufbauend eigene Produkte erstellen, soweit das Gesetz dies nicht ausdrücklich erlaubt.
- Die Software ganz oder in Teilen in andere Plugins, Programme oder Produkte einbauen.
- Hinweise auf Urheberrecht und Herkunft entfernen.
7. Verwendungszweck und Toleranzen
Die erzeugten Gewinde, Schrauben, Muttern und Scheiben orientieren sich an den genannten Normen. Toleranzen (Fit) sind Richtwerte. Ob ein gefertigtes oder gedrucktes Teil passt, hängt von Fertigungsverfahren, Maschine und Material ab. Prüfe Maße und Passung vor der Fertigung selbst. Für Prüfmaße und technische Zeichnungen gelten die Normen.
8. Updates und Support
Updates innerhalb der Hauptversion 2.x sind kostenlos. Ein Anspruch auf bestimmte Updates oder neue Funktionen besteht nicht. Support erhältst du per E-Mail an info@line-up.store.
9. Gewährleistung und Haftung
Es gelten die gesetzlichen Gewährleistungsrechte. Wir haften unbeschränkt bei Vorsatz und grober Fahrlässigkeit sowie bei Schäden an Leben, Körper oder Gesundheit. Bei einfacher Fahrlässigkeit haften wir nur bei Verletzung wesentlicher Vertragspflichten und begrenzt auf den vorhersehbaren, typischen Schaden. Für Datenverlust haften wir nur in dem Umfang, der bei regelmäßiger Datensicherung entstanden wäre. Die Haftung nach dem Produkthaftungsgesetz bleibt unberührt. Für die kostenlose Free-Version haften wir nur bei Vorsatz, grober Fahrlässigkeit und arglistig verschwiegenen Mängeln.
10. Beendigung
Bei einem Verstoß gegen diese Bedingungen endet das Nutzungsrecht. Die Software ist dann zu deinstallieren und alle Kopien sind zu löschen.
11. Schlussbestimmungen
Es gilt deutsches Recht unter Ausschluss des UN-Kaufrechts. Gegenüber Verbrauchern gilt diese Rechtswahl nur, soweit dadurch keine zwingenden Schutzvorschriften des Landes entzogen werden, in dem sie ihren gewöhnlichen Aufenthalt haben. Gerichtsstand für Kaufleute ist der Sitz der Greim & Brugger GmbH. Sollte eine Bestimmung unwirksam sein, bleiben die übrigen Bestimmungen wirksam.
© 2026 Greim & Brugger GmbH. Alle Rechte vorbehalten.
English
Licensor: Greim & Brugger GmbH (line-up.de)
Werderstr. 30, 79713 Bad Säckingen, Germany
Contact: info@line-up.store
By installing or using ThreadCut ("Software") you agree to these license terms. In case of doubt, the German version prevails.
1. Free and Pro
ThreadCut is available as a free Free version and as a Pro version. Both are the same Software. The Pro features are unlocked with a license key that you receive when you buy Pro at line-up.store.
2. License
You receive a perpetual, non-transferable and non-exclusive right to use the Software under these terms. The Software is licensed, not sold. All rights to the Software remain with Greim & Brugger GmbH.
3. Free version
You may use the Free version free of charge for private and commercial purposes on any number of computers.
4. Pro version
One Pro license allows one person to use the Pro features on up to 2 of their own computers. Several people need one license each. The license key belongs to your license and is confidential.
5. What you may do
- Install and use the Software within your license.
- Use the Software for private and commercial purposes.
- Use, sell and hand over to clients, without restriction, any renderings, animations, images and videos you create with the Software.
- Share Rhino files and exported models containing the generated threads, screws and nuts with clients and partners. Recipients do not need their own license.
- Manufacture or 3D print models created with the Software.
- Recommend the Free version and link to the official sources (Rhino Package Manager, food4Rhino, line-up.store).
- Install updates within major version 2.x free of charge.
6. What you may not do
- Pass on, publish or sell the license key, or make it available to more people or computers than your license allows.
- Offer the Software or its installation files for download, sale or rent outside the official sources.
- Circumvent the license key check or unlock Pro features without a valid key.
- Modify or reverse engineer the Software, extract its source code, or build your own products on it, except where expressly permitted by law.
- Include the Software in whole or in part in other plugins, programs or products.
- Remove copyright or origin notices.
7. Intended use and fits
The generated threads, screws, nuts and washers follow the stated standards. Fits are guide values. Whether a machined or printed part fits depends on the process, machine and material. Check dimensions and fit yourself before manufacturing. For gauges and technical drawings the standards apply.
8. Updates and support
Updates within major version 2.x are free. There is no entitlement to specific updates or new features. Support is available by e-mail at info@line-up.store.
9. Warranty and liability
Statutory warranty rights apply. We are liable without limitation for intent and gross negligence and for injury to life, body or health. In cases of simple negligence we are only liable for breach of essential contractual obligations, limited to the foreseeable, typical damage. For loss of data we are only liable to the extent that would have occurred with regular data backups. Liability under the German Product Liability Act remains unaffected. For the free Free version we are only liable for intent, gross negligence and fraudulently concealed defects.
10. Termination
Any breach of these terms ends the right of use. The Software must then be uninstalled and all copies deleted.
11. Final provisions
German law applies, excluding the UN Convention on Contracts for the International Sale of Goods. For consumers, this choice of law applies only insofar as it does not deprive them of mandatory protection under the law of their country of habitual residence. The place of jurisdiction for merchants is the registered office of Greim & Brugger GmbH. Should any provision be invalid, the remaining provisions remain in effect.
© 2026 Greim & Brugger GmbH. All rights reserved.